I have a great tutorial on making bias binding. Here is link 1 and link 2. And link 3 is attaching binding by machine using the dual feed feature on the BERNINA 780. Do you need the Dual Feed? No, but it sure is helpful.
When I teach the first thing we cover is needles and thread.
What do I use: Top Stitching and Microtex Needles. I’ll throw in the odd metallic now and then.
Why: Because they are sharp and they do the job. For going through multiple layers these do the job well. When quilting it’s important to make a whole appropriate to the size of the thread we’re quilting with. Skipped stitches and pokies happen as a result of using a needle that is too small. Using a needle that is too big will have the light streaming through our quilts because the thread does not adequately fill the hole left by the needle.
NOTE: when a stitch is taken we are making holes in our quilts.
Top Stitching needles are, generally, used for heavier thread and when I’m using multiple layers of batting. After watching Paula Reid’s Fluff and Stuff and listening at her feet for hours I’ve learned that top stitching needles are great for dense cotton batting making the job much easier.
Microtex Needles are, again generally, used for finer thread and less dense batting.
General Rule: the finer the thread the finer the needle, the heavier the thread the heavier the needle. If it feels fine it is, if it feels thick it is. If you’re getting skipped stitches go up one size.
When piecing an 80/12 pairs well with either MasterPiece or Aurifil 50 weight thread.