The B 790 and all its amazing features will be adorning my sewing table sometime this weekend.
There are New Features to explore, such as the stitch creator, and that new bobbin system.
There is a new stitch count to raise.
And, she needs a name.
PS – Now you all know that I love working with rulers on my home sewing machine. I’ve seen their potential in the domestic sewing machine world for years.
There’s been a lot of chatter about the BERNINA Ruler Foot, #96. BERNINA is not officially releasing it yet, they are redesigning it for the home sewing machine user. There’s a problem with the height of the foot and potential for the needle bar to hit it, with some force, when the foot is in the highest position. If you’re like me, and I know a lot of you are, instead of using the hand wheel to drop the needle into the quilt to pick up the thread, I tap the heel of the foot pedal. This sends the needle down with some force, that has the potential to cause some damage. This damage will not be covered under warranty.
It’s for this reason that I, personally, wouldn’t purchase and use an aftermarket foot for the machine.
The further chatter has included the question, “why would BERNINA be worried about my machine?” Well there are so many reasons. The one I’m going to focus on for now is two-fold: one on the business end, the other on the consumer relationship end. First the business end: they know that the consumer is wanting to use rulers on the home sewing machine and they have taken the time to do the testing with the foot for all possible outcomes. The possibility for real damage to the machine exists and BERNINA, therefore is taking the proactive approach to saying we don’t recommend this, and here’s why.
The second part is relational, if BERNINA chose not to make us aware of the potential damage to the machine, we then, as the consumers would be really ticked off with the company should a whole lot of us purchase the Ruler Foot, use it and then, in some weird, freakish way, damage the machine. As much as they can, BERNINA wants to maintain a good relationship with its consumer base.
It’s never easy for any business to maintain a good relationship with its consumer base however, in this case the company is trying to do so. I have to give them kudos for taking the time to do the testing before hand. For my part as the consumer, this little bit of education and a little personal experience are going a long way to Waiting for a ruler foot that will work with the domestic sewing machines. The personal experience comes in the form of sitting at my machine and going through the steps to bring the bobbin thread up. I had the #24 foot attached, and used the hand wheel to drop the needle down to pick up the bobbin thread. I did this on purpose to see where the needle bar stops and why there would be any concern at all. With the foot was in the highest position, the needle bar comes right to the top of the #24 foot. If I’d used the foot pedal with the #96 foot, the needle bar would have hit the top of the foot with some force.
So, I’m waiting. Impatiently, but I’m waiting.